| Specyfikacja |
Technologia
|
| Standard |
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3at 1000Base-T
IEEE802.3z Gigabit Ethernet Fiber
IEEE802.3x flow control and back-pressure.
IEEE802.1p Class of Service
IEEE802.1Q Quality of Service
|
Wydajność
|
|
| Technologia
|
Store and Forward Technology with 2.0Gbps wire-speed non-blocking Switch Fabric
|
Wydajność Systemu
|
1.785Mpps |
Bufer podręczny
|
2.75Mbits |
Przekierowanie utraconego połączenia
|
Two-way loss-signature auto forwarding, configured by DIP switch
|
Alarm o zdarzeniu
|
Configurable relay alarm output for port or power events
|
Interfejs
|
|
Ilość portów
|
1 x 10/100/1000 Base-TX with Auto MDI/ MDI-X function, Auto-Negotiation
1 x SFP socket with hot-swappable function for Gigabit Ethernet SFP Transceiver
|
Połączenia
|
10/100/1000 Base-TX: RJ-45
SFP socket: support 3.3V Gigabit Ethernet 1.25Gbps Fiber Transceiver.
Terminal block: 4-Pin for redundant power input; 2-Pin for alarm relay output |
Kabel
|
RJ-45 Connector: 4 pairs of Cat-5 UTP/STP cable with EIA/TIA 568B type conductor arrangement for 1000Base-T. Maximum link distance is 100meters
|
Oznaczenia LED
|
System: Power (Green) x2 ,Link Loss Forwarding (Red) x1, Alarm (Red) x1
RJ-45 port: Speed (Green): On (1000Mbps Link), Blinking (100Mbps Link), Off (10Mbps Link or disconnect).
Link/Activity (Green): On (Link), Blinking (Activity) Full Duplex/Collision (Yellow): On (link at full duplex mode), Blinking ( Collision)
SFP port: Link/Activity (Green): On (Link), Blinking (Activity) Full Duplex/Collision (Yellow):On (link at full duplex mode), Blinking ( Collision)
|
| Konfiguracja przełącznika DIP |
DIP 1: Port Event Alarm Enable/Disable
DIP 2: Power Event Alarm Enable/Disable
DIP 3: Link Loss Forwarding Enable/Disable
|
Rdzeń
|
RJ-45 connector: supports CAT-3, CAT-4, CAT-5 unshielded twisted pair or shielded twisted pair cable. The link distance is maximum 100 meters.
SC connector: supports multi-mode or single-mode optical fiber
Multi-mode fiber: 50/125um or 62.5/125um, max. distance 2KM
Single-mode fiber: 8/125um, 9/125um or 10/125 um, max. distance 30KM
|
| Zasilanie
|
|
Zasilanie systemowe
|
DC 24V (12~48V) with polarity reverse correction and over current protection
|
Zużycie zasilania
|
8 Watts @ DC 24V(Maximum)
|
Wykonanie
|
|
| Klasa ochrony
|
IP31
|
| Instalacja |
Wieszany na szynie DIN lub montaż na ścianie
|
| Obudowa |
Aluminiowa |
Wymiary
|
120mm(H) x 55mm (W) x108 mm (D) ( with DIN rail clip)
|
Środowisko
|
Temperatura pracy
|
-25 to 70°C |
| Temperatura przechowywania |
-40 to 85°C (-40 to 185°F)
|
| Wilgotność pracy |
0% to 95% (Non-condensing)
|
Wilgotność przechowywania
|
0%~ 95% (non-condensing)
|
| Certyfikaty |
| Bezpieczeństwo |
Hi-Pot 1.5KV on port to port and port to power / CE/EN60950
|
| EMI |
FCC Class A, EN55022 |
| EMC |
EN61000-4-2, EN61000-4-3, EN61000-4-4 , EN61000-4-5, EN61000-4-6, EN61000-4-8, EN610004-11 |
Wstrząsy
|
IEC 60068-2-27
|
| Swobodny upadek
|
IEC 60068-2-32
|
Wibracje
|
IEC 60068-2-6
|
Gwarancja
|
2 lata
|
Switche KORENIX 
.png)
